-
YFA Basics: Bypass and Out of Service
5:38
This video demonstrates how to use the bypass and out of service functions in Eaton's Yukon Feeder Automation (YFA) software and how the automation engine operates when a device has been bypassed or placed out of service.
-
YFA Basics: Configuring an S&C 6803 device in YFA
8:06
This video demonstrates how to add a S&C 6803 device with three switching ways to an Eaton Yukon Feeder Automation (YFA) software region. The video demonstrates editing the diagram, topology and communications configuration for this switching device.
-
Industrial Control for Conveyors
3:29
In this installment of What’s in the Trailer, we will explore a full package of control devices that will start, run, stop and automate the functions of a conveyor.
-
Industrial Control for Pump Systems - Advanced control protections
2:26
In this installment of What’s in the Trailer, we will talk about advanced protections that can be applied to pump systems to minimize damage due to faults. We will learn how Eaton’s control products react to problems that might occur and how these fe
-
Industrial Control for Pump Systems - Changes in water demand
2:02
In this installment of What’s in the Trailer, we will discuss controlling booster pumps to help efficiently transport water across regions and within commercial buildings like a downtown high rise. We will delve into how Eaton’s control products resp
-
Industrial Control for HVAC Systems - Redundant VFDs
2:22
In this installment of What’s in the Trailer, we’ll look at an HVAC system for a commercial building like a hospital. This system is outfitted with a redundant drive configuration, HVAC enclosed control and HVAC definite purpose contractors.
-
Industrial Control for HVAC Systems - VFDs
1:46
In this installment of What’s in the Trailer, we’ll look at an HVAC system for a commercial building like a hotel. This system is outfitted with variable frequency drives, which are applied to help manage the HVAC functions in the most cost-effective
-
YFA Pro Tip: Configuring redundancy in YFA
6:14
This video demonstrates the steps to set up redundancy between two servers running the same Eaton Yukon Feeder Automation (YFA) software region files. YFA version 3.0C1 is demonstrated, but the process is similar for earlier versions.
-
YFA Pro Tip: Retry automation on control failure setting
5:18
This video demonstrates a new setting in YFA Version 3.0R1 - Retry Automation on Control Failure. This setting allows Eaton Yukon Feeder Automation (YFA) software to try alternate options for reconnection.
-
YFA Basics: Configuring communications for an in-line system
8:38
This video demonstrates how to set up a master protocol instance from an Eaton Yukon Feeder Automation (YFA) software template to get data from the devices. The setting up of the slave protocol instance to pass data to the SCADA system is covered.
-
XT Compact Combination Starter
1:45
The XT compact combination starter is the latest addition to Eaton’s expansive portfolio of enclosed control products. This starter was designed to provide complete motor circuit protection in a cost-effective, compact solution.
- Next Page
